Fuji Electric MONITOUCH TS Series Hardware Specifications page 94

5-36 2. Main Menu Screen
Touch Switch Adjustment
If a position different from the pressed position turns white on the touch switch test screen, follow the
steps described below to adjust the touch switch position.
1. Press the [Adjust] switch on the touch switch test screen. The Touch Switch Adjustment screen
appears.
Touch switch test screen
2. Press on "1" that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set. "2" flashes.
3. Press on "2" that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set. "3" flashes.
4. Press on "3" that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set. "4" flashes.
5. Press on "4" that is flashing at the corner. When
the finger is released, a beep sounds and the
position is set.
6. To re-set the positions, press the
[Reset] switch and follow step 2 and
later.
7. To cancel the setting, press the
[Return] switch. The touch switch
test screen is displayed again.
8. To determine the setting, press the
[Fix] switch. A long beep sounds and
the positions are determined. The
touch switch test screen is displayed
again.
Touch Switch Adjustment screen