2.
Main Menu Screen
Displaying the Main Menu Screen
To bring up the Main Menu screen in the RUN mode, press the corners on the TS series unit and the
[MODE] switch on the System Menu
Recognition area
* For the details on the System Menu, refer to "System Menu" (page 5-43).
1. Hold down any corner for two seconds or longer, and remove your finger.
2. Hold down one of the other three corners for two seconds or longer. Then the System Menu is
displayed.
Hold down one of the other three corners for two second or longer.
* When an item, such as a switch, data display part with switch, display area, slider switch, scroll bar, or table data
display part, is placed on the position you press, the switch in the recognition area becomes invalid. Press a
corner where none of the items described above is placed. If the items are placed on all of the corners, change
the screen to another and display the Main Menu screen by following the procedure described above.
*
.
2 cm
2 cm
Hold down the upper left corner for two second or longer.
2. Main Menu Screen
2 cm
Recognition area
2 cm
System Menu
5-3
5