Table of Contents
Advertisement
1.
Features
The Techno Shot series (the TS series) features:
1. Low-cost standard model
The TS series is a high-performance low-cost model with a high degree of usability.
This is a high-resolution, high-definition programmable display unit that offers 65,536 maximum
displayable colors and WVGA (800 × 480 dots) resolution, incorporating a LCD with an LED
backlight.
2. Ethernet-enabled (TS1100i and TS1070i only)
The TS series, while it is a low-cost model, supports Ethernet connection.
The following network systems via Ethernet can be achieved with the TS series.
• Remote desktop
Screens on a server computer can be displayed on the TS series.
Computer functions become available even at worksites where computers cannot be brought
in.
* Using the remote desktop function requires licensing.
• Network camera
Images taken by network cameras can be viewed on the TS series.
Angles of network cameras at remote locations can be changed by operation from the TS
series.
• FTP server
The TS series can serve as the FTP server.
Via the FTP client tool in the computer, storage (e.g. USB memory) connected to the TS series
can be accessed.
• MES interface
From the TS series via the remote monitoring software "V-Server", insertion, retrieval, deletion,
and update can be executed on databases.
• TELLUS and V-Server Lite (remote maintenance software)*
TELLUS and V-Server Lite enable monitoring, operating, and gathering information from the
TS series at remote locations.
* This software has minimum required functions, and is supplied with the V-SFT-5 (version 5.4.28.0 or
later).
3. 8-way communication
A maximum of eight devices, such as PLCs or peripheral equipment, of different models or
manufacturers can be connected to one unit of the TS series over a network in combination with
Ethernet (max. 8 protocols) and serial communications (max. 3 protocols). A unit can
communicate with eight types of devices at one time and exchange data among the connected
devices.
Connection example: serial 3 ports + Ethernet
Ethernet
Serial
Manufacturer
A
LAN
COM1
TS
Inv erte r
1. Features
Manufacturer
Manufacturer
B
C
COM2
COM3
* The same connector is used for
COM2 and COM3.
Communicating via RS-232C
(COM2) and via RS-485 (COM3)
can take place at the same time.
1-1
1
A maximum of
5 types of
devices can be
connected.
Ethernet
Advertisement
Table of Contents
