Peripheral Equipment - Fuji Electric MONITOUCH TS Series Hardware Specifications

1-4 2. Models and Peripheral Equipment

Peripheral Equipment

The following are the options for the TS series:
Drawing Tool
Cables
Waterproof gasket
Other Options
V-SFT-5 (configuration software)
Application software for editing screen data for MONITOUCH.
Use version 5.4.28.0 or later with the TS series.
Applicable OS:
Windows 98SE/NT4.0/Me/2000/XP/XP 64 Edition/Vista (32-bit, 64-bit)/7 (32-bit, 64-bit)/
8 (32-bit, 64-bit)
D9-D25 (D-sub 9-pin-to-25-pin conversion cable) 0.3 m
Conversion cable used for connecting the communication cable for the CN1 (D-sub 25-pin)
in the V6/V7 series to the COM1 (D-sub 9-pin) in the TS series.
UA-FR (for USB-A port) 1 m
Cable for USB-A (master), with which connection from the front of the control cabinet is
allowed.
TS1xx0-WP
Waterproof gasket to make the front panel protection compliant with IP65.
TS1100-WP → TS1100 series
TS1070-WP → TS1070 series
TC-D9 (terminal converter)
Used for connection between COM1 (D-sub 9-pin) of the TS series and a controller at the
RS-422/485 terminal block.
USB-CFREC (USB CF card recorder)
Unit that connects to the USB-A port and makes a CF card available.