Saving Backup Copies Of Sram - Fuji Electric MONITOUCH TS Series Hardware Specifications

5-24 2. Main Menu Screen
7-3.

Saving Backup Copies of SRAM

This section explains the procedure for saving backup copies of the SRAM memory for battery
replacement.
1. Data selection
Press the [SRAM] switch on the Storage Transfer screen. When the switch is in the pressed state,
it is selected.
2. Transfer operation selection
Select [Display <−− Storage], [Display −−> Storage] or [Display <−−> Storage] from [Transfer
Menu] .
3. Access folder confirmation and selection
The SRAM Transfer screen is displayed.
• When [Display −−> Storage] or [Display <−−> Storage] is selected:
The access folder given the same name as the screen data in the TS unit is selected from
storage. The selected folder name is displayed.
Displays information of the
file currently selected (file
name fixed).
[Transfer Menu] field
SRAM Transfer screen
Shows [Display <−−> Storage] when
[Display <−−> Storage] is selected.
Lights up during communication
with a storage device.
Folder name currently selected
Remaining storage memory
capacity
Starts [Display −−> Storage]
transfer.
Moves back to the previous
screen.