Transferring Screen Data To Ts Series For The First Time - Fuji Electric MONITOUCH TS Series Hardware Specifications

5-2 1. Before Operation

Transferring Screen Data to TS Series for the First Time

There are four methods for transferring screen data for the first time after purchase.
1) Transfer via USB
Connect a USB cable to the USB slave port (USB-miniB) on the TS series, and transfer screen
data from the computer.
2) Transfer from storage
Use a USB memory device or an optional USB-CFREC with a CF
card.
Load screen data from the computer into storage in advance.
Press the [Storage (English)] switch on the initial screen. The
Storage Transfer screen is displayed. Data transfer can be performed on the screen.
3) Transfer from storage (automatic upload)
Load screen data from the computer to the storage device (e.g. USB memory) in advance.
When the power to MONITOUCH is turned on, screen data transfer is automatically started.
4) Transfer via Ethernet (TS1100i/TS1070i only)
Connect an Ethernet cable to the LAN port on the TS series, and
transfer screen data from the computer.
Pressing the [IP Address (English)] switch on the initial screen
brings up the Ethernet screen. Set the IP address for the TS series on the screen.
When the screen data has been transferred, the following screen is brought up. For details, refer
to "Main Menu Screen" (page 5-3).
Initial screen displayed when the power is turned on for the first time
LAN
Ethernet
USB-miniB
USB
USB-A
USB memory
or
Displays communication status between the TS and the computer.
USB-CFREC
Main Menu screen after screen data is transferred
IP address setting
for the TS
Displays the
Storage Transfer
screen.