[Main Menu] Switch
Pressing the [Main Menu] switch brings up the following drop-down window.
Main Menu Screen Composition
The Main Menu screen is configured as shown below:
Main Menu
screen
Main Menu screen
[Main Menu]
[RUN] switch (refer to page 5-6.)
switch
[Language] switch (refer to page 5-6.)
[Comm. Parameter] switch (refer to page 5-7.)
[Ethernet] switch (on TS1100i/TS1070i only)(refer to page 5-8.)
[SRAM/Clock] switch (refer to page 5-12.)
[Extension Program Info.] switch (refer to page 5-14.)
[Storage Transfer] switch (refer to page 5-15.)
[Bright Adjustment] switch (refer to page 5-28.)
[I/O Test] switch (refer to page 5-29.)
For more information on the [Simulator] switch, refer to the
V8 Series Operation Manual.
[Extended Setting] switch (on TS1100i/TS1070i only)
(refer to page 5-41.)
Extended Function Setting screen
Hold down the [Editor : USB] switch at the bottom left corner of the Main
Menu screen for three seconds or longer.
For more information, refer to "Extended Function Setting" (page 5-41).
2. Main Menu Screen
Main Menu drop-down window
[Print Check] switch (refer to page 5-34.)
[Switch Check] switch (refer to page 5-35.)
[Keyboard] switch (refer to page 5-35.)
5-5
5