Usb-Minib (Slave Port) - Fuji Electric MONITOUCH TS Series Hardware Specifications

2-18 5. USB Connector

USB-miniB (Slave Port)

This connector is used for screen data transfer or connection with a PictBridge-compatible printer.
The USB-miniB port on the TS series complies with USB versions 2.0 and 1.1.
• TS1100
Printer (PictBridge)
Screen hard copy, historical data or data sheet can be printed out from the PictBridge-compatible
printer.
Connection Example
USB-miniB
* Use a commercially available USB cable. You are recommended to use a shielded twist-pair USB cable of
5 m in length.
Available Printer
Any PictBridge-compatible printer can be connected.
V-SFT-5 Setting
Select [System Setting] → [Device Connection Setting] → [Others] → [Printer], and select
"PictBridge" for [Type] in the [Printer] tab window.
Rear view
Enlarged view
TS
• TS1070
Rear view
Printer (PictBridge)
PictBridge
*
USB cable
USB-A