Sram/Clock - Fuji Electric MONITOUCH TS Series Hardware Specifications

5-12 2. Main Menu Screen
5.

SRAM/Clock

Pressing the [SRAM/Clock] switch on the Main Menu drop-down window brings up the SRAM/Clock
screen.
This screen is used for correcting the built-in calendar (date and time) and for formatting the SRAM
area.
Main Menu drop-down window
Formats an SRAM area.
*1 Be sure to replace the battery. SRAM and clock time cannot be retained without battery power.
For replacing the battery, refer to "Coin-type Lithium Battery" (page 4-1).
SRAM/Clock screen
Displayed when the time for battery replacement is approaching.
Moves back to the
Main Menu screen.
Determines the
changed date and
time.
[←] / [→] switch:
moves the cursor.
[+] / [−] switch:
corrects the date and
time.
*1