Interface Specifications; Clock And Backup Memory Specifications - Fuji Electric MONITOUCH TS Series Hardware Specifications

Interface Specifications

Item
COM1
D-sub 9-pin
(COM1/2/3)
COM2
COM3
USB-A
USB Connector
(USB-A / B)
USB-
miniB
Applicable Standards
Baud Rate
Ethernet Port
Protocol
100BASE-TX /
10BASE-T
Functions
*4
(LAN)
Recommended cable
Applications
*1 Use DIP switches to switch between RS-422 (4-wire connection) and RS-485 (2-wire connection). For more
information, refer to page 4-6.
*2 For more information, refer to the TS Series Connection Manual.
*3 The same connector is used for RS-232C and RS-485 (2-wire connection) ports. Communicating via RS-232C
(COM2) and RS-485 (COM3) can take place at the same time.
*4 Provided as standard for TS1100i and TS1070i only
*5 Both straight and cross cables are usable, irrespective of the presence or absence of a hub.

Clock and Backup Memory Specifications

Item
Battery Specification
Backup Memory
Backup Period
Calendar Accuracy
* The range of deviation may increase, depending on the ambient temperature. Check and correct the clock
periodically.
Applicable
RS-422 (4-wire connection) / RS-485 (2-wire connection)
Standards
Synchronization Asynchronous type
Data Length 7- or 8-bit
Parity None, odd, even
Stop Bit 1- or 2-bit
4800, 9600, 19200, 38400, 57600, 76800, 115 Kbps
Baud Rate
(For PPI/MPI connection with a Siemens PLC: 187.5 Kbps
Applications PLC, temperature controller, etc.
Applicable
COM2: RS-232C / COM3: RS-485 (2-wire connection)
Standards
Synchronization Asynchronous type
Data Length 7- or 8-bit
Parity None, odd, even
Stop Bit 1- or 2-bit
Baud Rate 4800, 9600, 19200, 38400, 57600, 76800, 115 Kbps
Applications PLC, temperature controller, barcode reader, etc.
Applicable
USB versions 2.0 and 1.1
Standards
Version 2.0: High-speed 480 Mbps
Baud Rate
Version 1.1: Low-speed 1.5 Mbps, full-speed 12 Mbps
Printer (EPSON STYLUS PHOTO series), USB memory, USB-CFREC,
Applications
keyboard, mouse, etc.
Applicable
USB versions 2.0 and 1.1
Standards
Version 2.0: High-speed 480 Mbps
Baud Rate
Version 1.1: Low-speed 1.5 Mbps, full-speed 12 Mbps
Applications Screen data transfer, PictBridge-compatible printer
IEEE802.3u (100BASE-TX), IEEE802.3 (10BASE-T)
10 Mbps, 100 Mbps
TCP/IP, UDP/IP
Auto-MDIX
100 Ω UTP (unshielded twist-pair cable), category 5, max. 100 m long
*5
Screen data transfer, PLC, etc.
Coin-type lithium primary cell (CR2032)
SRAM 128 kbytes
3 years from the date of manufacturing (ambient temperature at 25 °C)
Monthly deviation ±5 sec (ambient temperature at 25 °C)
1. Specifications
Specifications
*3
Specifications
*
2-3
2
*1
*2
)