Fuji Electric MONITOUCH TS Series Hardware Specifications page 69

Table of Contents

Advertisement

IP Address
This is an address that is used for recognizing each node on the Ethernet and should be unique.
The IP address is 32-bit data which consists of the network address and the host address and can be classified
into A to C depending on the network size.
Class A
Network address
0
(7)
Class B
1 0
Class C
1 1 0
Notation
A string of 32-bit data is divided into four, and each segment delimited with a period is in decimal notation.
Example: The IP address in class C shown below is represented as "192.128.1.50".
11000000 10000000 00000001 00110010
<Unusable IP addresses>
• "0" is specified for one byte at the extreme left. Example: 0.x.x.x
• "127" is specified for one byte at the extreme left (loop back address). Example: 127.x.x.x
• "224" or more is specified for one byte at the extreme left (for multi-cast or experiment). Example: 224.x.x.x
• The host address consists of only "0" or "255" (broadcast address). Example: 128.0.255.255, 192.168.1.0
Port Number
Multiple applications are running on each node, and communications are carried out for each application between
the nodes. Consequently, it is necessary to have a means to identify the application that data should be
transferred to. The port number works as this identifier. Each port number is 16-bit data (from 0 to 65535).
The TS series uses ports for screen data transfer (8001), PLC communication (as desired), and the simulator
(8020). Set a unique number in the range of 1024 to 65535. For a PLC or a computer, set the port number in the
range of 256 to 65535. It is recommended to set a greater number.
Default Gateway
A gateway and a router are used for communication between different networks.
The IP address of the gateway (router) should be set to communicate with the node(s) on other networks.
Subnet Mask
A subnet mask is used for dividing one network address into multiple networks (subnet).
The subnet is assigned by specifying a part of the host address in the IP address as a subnet address.
Class B
1 0
Subnet mask
11111111
<Unusable subnet masks>
• All bits are set to "0". 0.0.0.0
• All bits are set to "1". 255.255.255.255
Host address (24)
Network address (14)
Network address (14)
Network address (14)
255.
255.
11111111
11111111
Network address
Subnet address
2. Main Menu Screen
Host address (16)
Host address (8)
Host address (16)
255.
0
00000000
Host address
5-11
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monitouch ts1070Monitouch ts1070iMonitouch ts1100 seriesMonitouch ts1070 seriesMonitouch ts1100Monitouch ts1100i

Table of Contents