Fuji Electric MONITOUCH TS Series Hardware Specifications page 81

When [Display <−−> Storage] Is Selected:
1. When [Display <−−> Storage] is selected, the Storage Transfer screen below is displayed.
The screen data in the unit is compared with the screen data (in the DSP folder) in the access
folder.
Displays information of the
folder currently selected.
2. Data comparison start
Press the [Start] switch.
3. During data comparison to data comparison completed
During data comparison, the [Start] switch changes to [Transferring]. On successful completion,
the following message dialog is displayed. Press the [OK] switch.
* If any other message is displayed, refer to "Message Dialog Displayed during Data Transfer
(between TS and Storage)" (page 5-27).
Storage Transfer screen
Comparing
2. Main Menu Screen
Lights up during communication
with a storage device.
Folder name currently selected
Remaining storage memory
capacity
Starts comparison between
[Display <−−> Storage].
Moves back to the previous
screen.
Data comparison completed
5-23
5