HP StorageWorks HA-Fabric Manager Installation Manual page 35

Figure 21 LCD panel (Input Password)
2. Using the button to increment a digit, the
the button to move the cursor left, and the
right, input the default password (9999), then press ENTER. The LAN 1
Setting?? message is displayed at the LCD panel.
Press ENTER and the following message is displayed
3.
current LAN1 IP address. (The default is 192.168.0.1).
Figure 22 LCD panel (LAN 1 IP address)
4. Use the arrow keys as described in step 2 to input a new IP address, then
press ENTER. The following message is displayed
subnet mask. (The default subnet mask is 255.0.0.0).
Figure 23 LCD panel (Input Netmask)
5. Use the arrow keys as described in step 2 to input a new subnet mask, then
press ENTER. The following message is displayed
address whose first three octets (each three decimal digits) are the same as the
IP address entered in step 5, and the last octet is set to decimal 254 (or the
default gateway IP address of 0.0.0.0 is displayed).
Figure 24 LCD panel (Input Gateway)
6. Use the arrow keys as described in step 2 to input a new gateway IP address,
then press ENTER. The following message is displayed
default DNS server IP address of 0.0.0.0.
HP StorageWorks HA-Fabric Manager Appliance installation guide FW07.00.00/HAFM
button to decrement a digit,
button to move the cursor
(Figure 22) with the
(Figure 23) with the current
(Figure 24) with an IP
(Figure 25) with the
SW 08.06.00
35