Installing The Hafm Appliance; Slide Rail Installation - HP StorageWorks HA-Fabric Manager Installation Manual

1. As shown in
appliance with ten (10) pan-head Phillips screws (M4 x 10 cm). Use five (5)
screws per side. Ensure the screws are securely tightened.
Figure 8 Slide rail installation

Installing the HAFM appliance

To install the HAFM appliance in the equipment cabinet:
1. If the front bracket portions of the bracket assemblies are installed at the front
of the cabinet (typical installation), install the server through the cabinet front.
2. While fully supporting the HAFM appliance, slide the HAFM appliance and
attached slide rails into the mounting brackets as shown in
24
Installation
Figure 8, attach the left and right slide rails to the HAFM
Figure 9.