Configuring And Enabling Event Notification Features - HP StorageWorks HA-Fabric Manager Installation Manual

d. Click in the time field and enter the desired time, then click the adjacent
up or down arrow and select AM or PM.
Click Apply. Record date and time information for reference if the HAFM
e.
appliance hard drive fails and must be restored.
7. Click OK to close the Date/Time Properties dialog box.
8. Click close (X) at the upper right corner of the Control Panel window to return
to the Windows 2000 desktop.

Configuring and enabling event notification features

The HAFM appliance provides the following event notification features:
• Call home via dial-out — This feature provides automatic dial-out through the
modem to a service support facility to report Director or Edge Switch problems.
This functionality is provided in the shipped software.
• Proactive Services call-home via LAN — This feature reports events via the
LAN to a SANworks Management appliance or other server running the HP
Proactive Services software.
HP Proactive Services software is offered at no additional charge for subsystems
covered under an on-site warranty or on-site storage hardware support contract. To
order Proactive Services software, contact your Hewlett-Packard customer service
representative.
NOTE:
You can choose only one of the two call home options: call home via dial-out or call
home via LAN. You can use either feature, but not both.
The HAFM appliance is shipped with the HAFM application installed and the call
home via dial-out feature selected by default. If you prefer to use the Proactive Services
call home via LAN feature, you must:
• Order the Proactive Services software.
• Remove the HAFM application.
• Reinstall the HAFM application.
• Select the call home via LAN option during the HAFM application installation.
HP StorageWorks HA-Fabric Manager Appliance installation guide FW07.00.00/HAFM
SW 08.06.00
59