Logging Into Hafm - HP StorageWorks HA-Fabric Manager Installation Manual

11. Record the changed gateway and DNS server addresses for reference if the
HAFM appliance hard drive fails and must be restored.
12. To configure addresses for the public LAN connection (LAN 1), double-click
the Local Area Connection 1 icon and repeat step 4 through step 10 of this
procedure.
13. Click close (X) at the upper right corner of the Network and Dial-up Connections
window to return to the Windows 2000 desktop.
14. Reboot the HAFM appliance:
Click Start > Shut Down at the Windows 2000 desktop. The Shut
a.
Down Windows dialog box is displayed.
b. Select the Restart option the Shut Down Windows dialog box, and then
click OK to reboot the HAFM appliance.
c. To log into HAFM, see

Logging into HAFM

You must log into a HAFM appliance to monitor a SAN. Perform the following:
NOTE:
You must have an established login and password account on the appliance in order
to log in.
1. The HAFM Log In dialog box displays automatically when you open the application
(see Figure 46
HP StorageWorks HA-Fabric Manager Appliance installation guide FW07.00.00/HAFM
Figure 46.
SW 08.06.00
49