Configuring Proactive Services Call Home Via Lan Feature - HP StorageWorks HA-Fabric Manager Installation Manual

Figure 58 Configure Identification dialog box
3. Replace the default text with the following entries:
• Name — Enter a name for this Director or Edge Switch as appropriate
for your SAN. Click Set Name As Nickname, which will display a
check mark in the box. This will be the name that will be displayed with
the icon for this Director or Edge Switch in the HAFM Product View and
Fabric View is displayed.
• Description — Enter the address of your installation.
• Location — Enter the WFM Site ID and Super Region code, as obtained
in
as shown in the following example
US1234567890~AA
• Contact — Enter the contact name, phone number, and company name
exactly as provided to HP in
"~" (tilde) characters, as follows:
FirstName~LastName~PhoneNumber~CompanyName
For example:
Joe~Smith~5085551515~ABCCompany
Click Activate. The Configure Identification dialog box closes and the Element
4.
Manager window at the Hardware View for this device is still displayed.
On the menu bar, click Maintenance > Enable Call Home Notification.
5.
6. Place a check mark in the Enable Call Home Event Notification option.
7. See Testing remote notification

Configuring proactive services call home via LAN feature

The HAFM appliance call home via LAN feature provides automatic event notification
to a support center for reporting Director or Edge Switch problems. In order to report
events, this feature requires the HAFM appliance to have a valid LAN connection to a
64
Configuration
Obtaining required information, separated by "~" (tilde) characters,
Obtaining required
for instructions on testing the call home feature.
information, separated by