Set Up The Lan - ADC MM701G2 User Manual

Appendix A: Command Line Interface Access

Set Up the LAN

If you are operating in Router mode and in a LAN environment, then you also need to set your LAN protocol,
Ethernet Port IP address, and subnet mask.
If you prefer, you may use the default values of 10.0.0.1 for the Ethernet Port IP Address, and 255.255.255.0 for the
subnet mask.
Step
1 From the System Management main menu
Configuration menu
NOTE: The LAN Protocol can only be changed through the Command Line Interface.
A-6
(Figure A-6).
Figure A-6. LAN Configuration
Action
(Figure A-4 on page A-4), enter 2 to display the LAN
April 14, 2006
MM70xG2-UM-03