ADC MM701G2 User Manual page 27

April 14, 2006
Step
1 Select LAN on the menu bar, then select DNS Relay under LAN Options to access the DNS Relay
mode page (Figure
Note:
address assigned, then DNS: Enable Relay is automatically enabled and the DNS server IP
address automatically displayed in that field.
2 Select Enabled, then click Configure to access the following DNS: Enable Relay page
3 Enter the DNS server IP address for the device to which the modem will forward IP address resolution
requests.
4 Click Apply.
MM70xG2-UM-03
3-2).
Figure 3-2. DNS Relay Mode Page
If DHCP Client is selected (see
Figure 3-3. DNS Enable Relay Page
Action
"Configure the LAN" on page
Chapter 3: Provisioning
3-1) and a DNS server IP
(Figure 3-3).
3-3