Table of Contents
Advertisement
Appendix A: Command Line Interface Access
Step
2
Enter the session number to display the session screen.
ROUTED.)
3
Change settings as appropriate. See these sections for detailed information about editing parameters for
these protocols:
•
"Set Up an RFC 1483 Bridged Session" on page A-10
•
"Set Up an RFC 1483 Routed Session" on page A-11
•
"Set Up a PPPoA or PPPoE Routed Session" on page A-13
4
Select Apply new setting to immediately activate the changes that you have made for this session.
5
Select Save Current configuration from the Main Menu as described in
Configuration" on page A-28
A-16
Action
Figure A-12. PPPoA Routed Session
or the changes will be lost upon reboot or power cycle.
(Figure A-12
below shows session 1, PPPoA-
"Saving the Current
April 14, 2006
MM70xG2-UM-03
Advertisement
Table of Contents
