ADC MM701G2 User Manual page 114

Appendix A: Command Line Interface Access
View ATM Counters
Step
1 From the G.SHDSL Statistic Menu, enter 3 to display the ATM Statistics menu
2 View the current statistics, as described below.
• Rx Cell
Indicates the total number of cells received by the modem on the DSL interface.
• Tx Cell
Indicates the total number of cells transmitted by the modem over the DSL interface.
• Cell Drop
Indicates the total number of cells dropped by the modem.
• Cell Delineation Flag
Indicates if cell delineation errors have occurred on the modem. A 0 indicates that no errors have
occurred A 1 indicates that errors have occurred.
• Rx HEC Errors
Indicates the total number of received ATM cells marked with uncorrectable header errors as
indicated in the header-error control (HEC) byte.
3 Enter 5 on the G.SHDSL Statistic Menu to Clear the error counters.
A-26
Action
Figure A-20. ATM Statistics Menu
April 14, 2006
(Figure A-20).
MM70xG2-UM-03