Manage Wan Sessions; Mm70Xg2 - ADC MM701G2 User Manual

Adc telecommunications megabit modem user manual mm701g2, mm702g2
Table of Contents

Advertisement

Appendix A: Command Line Interface Access
M
WAN S
ANAGE
ESSIONS
From the System Management main menu
Management menu
(Figure
A total of 32 WAN sessions can be created using the protocols listed below. Make sure, however, that you do not
exceed the maximum limit per protocol type as shown below:
• RFC 1483-Bridge (up to 8 sessions)
• RFC 1483-Router (up to 16 sessions)
• PPPoA or PPPoE (up to 8 sessions for either type)
F4 and F5 OAM are enabled on default PVCs (0/35 and 0/100) and on every new PVC that is created.
Note:
The modem is shipped with factory defaults as a Remote modem.
With V3.2.0, there are two RFC-1483 WAN Bridging sessions with PVC's 0/35 and 0/100. For point-to-point
LAN extension applications, delete one WAN session.
A-8
(Figure A-4 on page
A-7). The WAN Session Management screen displays the available options.
Figure A-7. WAN Session Management
A-4), enter 1 to display the WAN Session
M0029-A
April 14, 2006
MM70xG2-UM-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm702g2

Table of Contents