ADC MM701G2 User Manual page 44

Chapter 5: Configuring System Parameters
Step
2 To add a new user account, do the following:
a. Click Add a new user. The following dialog is displayed
Note:
access to the modem for configuration and management.
b. Enter the following information:
– User Name
The login name for this user. The login name can be a maximum
of 32 characters and all keyboard characters, except a space,
are allowed.
– Password
The password associated with this user login. The password must
be a minimum of six and a maximum of 32 alphanumeric
characters (including caps and lowercase).
– Access Level
The level of access to modem configuration and management
allowed for this user. Choose from the following list of
access levels:
Access Level
Super User
Engineer
Default
– Comment
Identifies the user in a way that is meaningful to you. All keyboard characters are allowed.
5-2
Figure 5-2. Add New User
It is important to change the password for all three default user accounts to ensure secure
Table 5-1. User Access Levels
This user has full administrative access to the modem. This includes full view and write access to
all modem configuration and management.
This user has write access to all LAN-side and DSL configuration (including DSL testing) only. All
other configuration access (WAN session and System) is view only.
This user has view only access to all modem configuration and management. Default is the
default access level when setting up new user accounts.
Action
(Figure 5-2).
Definition
April 14, 2006
Defaults
User Name: admin
Password: password
Access level: superuser
User Name: isp
Password: password
Access level: engineer
User Name: user
Password: password
Access level: default
MM70xG2-UM-03