Updating System Software; Viewing System Information; Rebooting The Modem - ADC MM701G2 User Manual

April 14, 2006
U S
PDATING YSTEM
If you need to update the modem software, use the Web interface HTTP upgrade (see
on page 9-11). Through the Web interface HTTP upgrade capability, you can transfer software image (.tar).
Note: It is recommended that you use the Web interface HTTP to download software.
Note: After uploading code V3.2.0 to the modem using HTTP, perform Factory Defaults using the Reset
Button.
V S I
IEWING YSTEM
The System Information page is a read-only summary of the current modem configuration. It includes information
about the firmware release, model, release date, MAC address, and DSP version. This information is often used by
technical support when troubleshooting.
From the Main Menu, enter 4 for System Information
R M
EBOOTING THE
Before you reboot the modem, save configuration changes as described in
page A-28.
MM70xG2-UM-03
S
OFTWARE
NFORMATION
Figure A-23. System Information
ODEM
Appendix A: Command Line Interface Access
(Figure A-23).
"Saving the Current Configuration" on
"Update System Software"
A-29