Install The Gauge Wheels; Gauge Wheel Mounting Locations - Raven AutoBoom Installation Manual

Chapter 3

Install the Gauge Wheels

Gauge Wheel Mounting Locations

Wheel mounting locations may be influenced by the boom configuration. Determine the appropriate location for
mounting the wheels on the boom, ensuring the wheels will not interfere with or be damaged while folding or
unfolding the booms.
Mount the Gauge Wheels
Wheel Mounting Bracket Installed
FIGURE 13.
Remove the nuts from the right wheel axle (P/N 063-0131-585).
1.
Place the wheel (P/N 322-0131-003) on the right wheel axle.
2.
Align and place the hub retainer bracket (P/N 107-0171-617) on the wheel.
3.
Reinstall the lug nuts on the wheel axle to secure the wheel and hub retainer bracket.
4.
Secure the right wheel mounting bracket (P/N 116-0159-608) to the front of the right boom by installing four
5.
1-9/16" W x 2-1/2" L x 3/8" thread U-bolts (P/N 107-0171-611) and eight 3/8"-16 zinc flanged lock nuts (P/N
312-1001-164).
Insert the right wheel axle into the right wheel mounting bracket, positioning it so that the bottom of the
6.
wheel touches the ground (or nearly so) and the wheel faces away from the machine.
Secure the gauge wheel assembly in the wheel mounting bracket by installing two 1/2"-13 x 1-1/2" SS hex
7.
bolts (P/N 311-0058-186) and two 1/2" zinc hex nuts (P/N 312-1001-043).
Repeat the steps above to install the left wheel.
8.
20
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
Spra-Coupe 7X60 (2010 & Newer) AutoBoom® Installation Manual
WARNING