3. Commissioning
3.3.6 Specific settings for SFC−LAC motor controller
Menu/Tab
[Configuration]
[Controller] [Interface]
Tab. 3/6: Specific settings for SFC−LAC motor controller
3−12
Parameter
Controller type
CAN address
Bit rate
Data profile
Supply voltage
Value
SFC−LAC−...−CO (CANopen)
CAN address of the axis,
see Tab. 3/2
1 MBit/s
DS 402
only with external" option:
An external power supply must
be attached to the CAN bus
plug; see section 2.4, Tab. 2/4
and P.BE−SFC−LAC−CO−...
Festo P.BE−CPX−CMXX−EN en 0910a