3. Commissioning
Festo P.BE−CPX−CMXX−EN en 0910a
3. Click the button Properties" in the General" tab.
The dialog Properties of <Your Connection>" opens.
4. Mark the element Internet Protocol (TCP/IP)" in the
General" tab of the dialogue Properties of
<Your Connection>" and click on the Properties" button.
The dialogue Internet Protocol (TCP/IP) Properties"
opens.
Fig. 3/1: Setting the IP address and subnetwork mask
Note
Write down the network settings of your PC before you
change them.
5. Set the network properties of your PC in the dialogue
Properties of Internet Protocol (TCP/IP)" and confirm
with OK.
3−15