Contents and general instructions
Notes on this description
Festo P.BE−CPX−CMXX−E N en 0910a
Note
This manual refers to the multi−axis interface CPX−CMXX
from Revision 03.
You will find the revision number on the name plate
This description contains special information on the method
of operation, mounting, installation and commissioning of the
CPX−CMMX multi−axis interface.
You will find additional information on the CPX−CMXX
multi−axis interface in the following documentation.
Document
Online help on the FCT plug−in
CMXX
Description of the Festo
handling and positioning profile
for multi−axis movements
(FHPP−MAX),
P.BE−CMXX−FHPP−SW−...
Short description of CPX−CMXX,
P.BE−K−CPX−CMXX
Tab. 0/1: Overview of additonal documentation on the
multi−axis interface CPX−CMXX
Contents
Description of the configuration,
parameterisation and
commissioning of the multi−axis
interface CPX−CMXX
Description of the Festo data
profile FHPP−MAX, which is used
for communication between
controller and CPX−CMXX.
Information on fitting and
installation of the multi−axis
interface CPX−CMXX.
XIII