Festo CPX Series Manual page 55

3. Commissioning
Festo P.BE−CPX−CMXX−EN en 0910a
Administrator rights are required to install the software.
Note
If applicable, deinstall the old version of the CMXX plug−in
before you install a new version.
Proceed with installation of the CMXX FCT plug−in as follows:
1. Close all programs.
2. With a file selection program (e.g. in Explorer),
switch to the directory with the installation program of
the CMXX FCT plug−in.
3. Start the installation program with a double−click.
4. Select the desired language and confirm your selection
with OK."
5. Follow the instructions in the installation program.
With Continue" you can move to the next step,
with Return" to the previous step.
Greeting and display of current information on FCT
Selection of installation directory
Start of installation
Display of successful installation
Inquiry and installation of plug−ins
End of installation program
When installation is completed, you will find the FCT entry in
the start menu under Festo Software".
The CMXX plug−in is available for setting up new projects as
Festo components and is activated automatically when an
existing CMXX project is selected.
3−5