Festo CPX Series Manual page 46

2. Fitting and installation
M12 adapter
2
3
1 1
5
4
Bus in
Fig. 2/3: Pin assignment of the CAN bus interface (adapter for M12 connection 5−pin)
2−14
M12 adapter (IP65)
With this adapter the CAN bus is connected via a 5−pin M12
socket with PG 9 screw connector. Use the second connection
socket for continuation of the CAN bus.
Note
Use protective caps or blanking plugs to seal unused
·
connections.
You will then comply with protection class IP65.
Order this adapter from Festo (FBA−2−M12−5POL).
2
3
5
4
Bus out
Protective cap or plug with bus
termination resistor if
connection is not used.
With the two M12 connections, you can implement a
T−adapter.
Pin no.
1. Screening
2. 24 V DC bus (max. 4 A)
3. 0 V bus
4. CAN_H
5. CAN_L
Festo P.BE−CPX−CMXX−EN en 0910a