Installing Fct And Fct Plug−Ins - Festo CPX Series Manual

3. Commissioning
3.2 Preparing configuration and parameterisation
3.2.1 Installing FCT and FCT plug−ins
3−4
To configure and parameterise the CPX−CMXX and motor
controller, you need a PC on which the Festo Configuration
Tool (FCT) and the respective FCT plug−ins are installed.
Note
Installation of the FCT plug−ins of the motor controller is
described in the respective online help.
The FCT plug−in CMXX is installed on your PC with the
installation program of the FCT.
The installation program can be obtained over the Internet:
1. Open the Internet browser of your PC system.
2. Enter the following Internet address:
www.festo.com".
3. Make your choice of country and, if applicable, language.
4. Select the Automation" field or actuate the Go" button.
5. Switch to the Support" area.
6. Choose the Download Software" field.
7. Enter the FCT plug−in designation CMXX" as search term.
8. Note the information and remarks in the file
Read me on FCT − Festo Configuration Tool for
CPX−CMXX".
9. Choose the corresponding program for transfer to
your PC.
10. Save the installation program in a directory of your
choice.
Festo P.BE−CPX−CMXX−EN en 0910a