Connecting
5.2 Antenna cable(s) connection
5. Insert cables into MAG 8000 hole.
6. Screw M20 cable gland into MAG 8000 housing.
Make sure the gland is tightened to torque 10 Nm.
7. Push rubber tubing into M20 cable gland. Adjust antenna cable and analog inputs cable
making sure that the shield of the analog inputs cable and the SMA connector are fixed by
the cable clamp kit. Tighten the two screws of the cable gland kit.
8. Mount the M20 cable gland cover. Tighten it to torque 10 Nm.
28
SITRANS FM MAG 8000 3G/UMTS add-on module
Operating Instructions, 03/2020, A5E03644134-AC