Configuration Of Data Sampling Interval And Transmission Timing - Siemens SITRANS F M MAG 8000 Series Operating Instructions Manual

● P15 = user name for SMTP(S) server authentication
● P16 = password for SMTP(S) server authentication
● P17 = email address of the Wireless Communication Module
● P18 = first email address for data reception
● P19 = second email address for data reception
● P20 = third email address for data reception
For demonstration purposes some email addresses can be created for the domain
mag8000.com. To access them, please contact the Siemens technical support team.
Table 6-3
Domain name
Port number
User name
Password
Email address of the Wire‐
less Communication Module
Alternatively you can use one of the following email addresses:
1)
demo02@mag8000.com
demo03@mag8000.com
demo04@mag8000.com
demo05@mag8000.com
The configuration commands for the demonstration server should look like this:
● Configuration;P14=send.one.com;P42=25;P15=demo01@mag8000.com;
P16=xxx;P17=demo01@mag8000.com;
● Configuration;P18=a@siemens.com;P19=b@siemens.com;
P20=c@siemens.com;
6.3.7

Configuration of data sampling interval and transmission timing

The data sampling interval is defined by parameter P55 and can be specified in min (minute)
or h (hour). The minimum sampling interval is 1 minute.
The repeated data transmission interval is defined by parameter P56 and can be specified in
h (hour), d (day) or M (month).
The synchronization time of data transmission is defined by parameter P62 and must be
specified in 24 hour time format.
Example:
You want to collect the measurement data of the MAG8000 device every minute and send the
data every day at 06:00 am. In this case, you should configure the Wireless Communication
Module like this:
● Configuration;P55=1min;P56=24h;
● Configuration;P62=06:00;
SITRANS FM MAG 8000 3G/UMTS add-on module
Operating Instructions, 03/2020, A5E03644134-AC
Access information for the SMTP demonstration server
send.one.com
25
demo01@mag8000.com
xxxx (please contact the Siemens Flow technical support team)
demo01@mag8000.com
1)
1)
Commissioning
6.3 Configuration
39