Configuration Of Ftp(S) Protocol - Siemens SITRANS F M MAG 8000 Series Operating Instructions Manual

6.3.5

Configuration of FTP(S) protocol

The settings for FTP and FTPS share the same parameters.
● P43 = the domain name or IP address of the customer's FTP(S) server
● P44 = the port number of the customer's FTP(S) server
● P45 = user name to access the FTP(S) server
● P46 = password to access the FTP(S) server (special characters are supported)
● P84 = the working directory on the customer's FTP(S) server used to upload the .csv file
(can be left empty if not needed)
Demonstration server
For demonstration purposes, you can access the FTP demonstration server on
ftp.mag8000.com. To get the user name and password, please contact the Siemens Flow
technical support team.
Table 6-2
Domain name
Port number
User name
Password
Working directory
The configuration commands for the demonstration server should look like this:
● Configuration;P52=3;
(FTP and SMS)
● Configuration;P43=ftp.mag8000.com;P44=21;P45=xxxx;P46=xxxx;
P84=FTP;
The .csv files with measurement data will appear on the FTP server like below.
SITRANS FM MAG 8000 3G/UMTS add-on module
Operating Instructions, 03/2020, A5E03644134-AC
Access information for the FTP demonstration server
ftp.mag8000.com
21
xxxx (please contact the Siemens Flow technical support team)
xxxx (please contact the Siemens Flow technical support team)
Create a working directory on your FTP server, if you need this feature
Commissioning
6.3 Configuration
37