Siemens SITRANS F M MAG 8000 Series Operating Instructions Manual page 27

1. Screw together the M12 connector parts, making sure the parts are tightened correctly.
2. Screw the protection cover onto the M12 female. The plastic loop must be around the cable.
Mount cable gland with antenna and analog inputs cable
1. Push the antenna cable through the upper and cover parts of cable gland.
2. Using, for example, a screw driver, push through the rubber tubing to open its side.
3. Carefully push the antenna cable into the rubber tubing from the side and remove the tool
(e.g. screw driver).
4. Check that the two cables are inserted correctly into the rubber tubing.
SITRANS FM MAG 8000 3G/UMTS add-on module
Operating Instructions, 03/2020, A5E03644134-AC
Connecting
5.2 Antenna cable(s) connection
27