FusionModule2000 Smart Modular Data Center
Maintenance Guide
5.4.14 Replacing the Switch
Prerequisites
Context
Recommended tools and materials: Phillips screwdriver, insulation tape
Procedure
Step 1 Disconnect power supply from the lighting controller.
Step 2 Remove the switch panel, as shown in
Figure 5-29 Removing the switch panel
Step 3 Remove the old switch.
1.
Issue 01 (2016-10-18)
The switch needs to be replaced.
A spare switch of the same model is available and functional.
When removing cables, label the cables with corresponding terminal ports for later connection.
Remove the communications cable and power cable using a Phillips screwdriver and apply
insulation measures such as wrapping the cables with insulation tape to avoid hazards.
Remove the front cover from the switch, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-29.
Figure
5 Parts Replacement
5-30.
57