Table of Contents
Advertisement
Chapter 1: Overview
Maximum
Distance
Cable
Requirements
Automatic MDIX
Detection
Port Pinouts
24
The ports have a maximum operating distance of 100 meters (328 feet).
The cable requirements for the ports on the IS230-10GP switch are listed
in Table 1.
Table 1. Twisted-Pair Cable Requirements
Cable Type
Standard TIA/EIA 568-B-
compliant Category 3 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 16 MHz.
Standard TIA/EIA 568-A-
compliant Category 5 or TIA/
EIA 568-B-compliant Enhanced
Category 5 (Cat 5e) shielded or
unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz.
Standard TIA/EIA 568-B-
compliant Category 6 or 6a
shielded cabling.
The 10/100/1000 Mbps twisted-pair ports are IEEE 802.3ab compliant,
with automatic MDIX detection. This feature automatically configures the
ports to MDI or MDI-X depending on the wiring configurations of the end
nodes.
Refer to Table 19 on page 90 for the pinouts of the twisted-pair ports at 10
or 100 Mbps and to Table 20 on page 91 for the port pinouts at 1000
Mbps.
10Mbps
100Mbps
Yes
Yes
Yes
Yes
Yes
Yes
1000Mbps
No
Yes
Yes
Advertisement
Table of Contents
