Sfp Slot Leds; Poe Status Leds; Figure 6: Sfp Leds: Ports 9 And 10; Figure 7: Poe Status Leds: Ports 1-8 - Allied Telesis IS Series Installation Manual

Industrial ethernet layer 2 switch
Hide thumbs Also See for IS Series:
Table of Contents

Advertisement

SFP Slot LEDs

PoE Status LEDs

Each SFP slot has one LED. The SFP LEDs for Combo ports 9 and 10 are
shown in Figure 6.
Figure 6. SFP LEDs: Ports 9 and 10
The descriptions of the SFP LEDs are defined in Table 8.
Table 8. SFP Slot LEDs: Ports 9 and 10
State
Solid Green
Flashing Green
Off
The PoE Status LEDs for twisted-pair ports 1-8 are shown in Figure 7.
Figure 7. PoE Status LEDs: Ports 1-8
IS230-10GP Industrial Ethernet Layer 2 Switch Installation Guide
Description
The port has established a 100Mbps or
1Gbps link to a network device.
The port is transmitting or receiving
network packet traffic at 100Mbps or
1Gbps.
The port has not established a link to a
network device.
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Is230-10gp

Table of Contents