Din Rail Bracket; Screw Holes For Wall Brackets; Figure 3: Switch Back Panel Features - Allied Telesis IS Series Installation Manual

DIN Rail Bracket

Screw Holes for
Wall Brackets
Figure 3 identifies the components on the switch back panel.
DIN rail
bracket
Figure 3. Switch Back Panel Features
The switch comes with one DIN rail bracket pre-installed on the back
panel. The bracket is compatible with DIN 35x7.5mm rails.
The back panel has six holes for securing the two wall brackets that are
included in the accessory kit.
IS230-10GP Industrial Ethernet Layer 2 Switch Installation Guide
Screw holes for
wall bracket
Screw holes for
wall bracket
19