Sfp Transceiver Ports; Sfp Transceivers; Leds; Figure 6: Sfp Transceiver Port Leds - Allied Telesis AlliedWare Plus GS980M Series Installation Manual

SFP Transceiver Ports

SFP Transceivers

LEDs

The switches have four SFP transceiver ports.
The transceiver ports support 100Mbps and 1Gbps SX/LX SFP
transceivers

100Mbps or 1000Base single-mode or multi-mode fiber optic
transceivers
 100Mbps or 1000Mbps bi-directional (BiDi) fiber optic transceivers
 1000Base-TX transceivers with RJ-45 connectors for twisted pair
cable
SFP transceivers are purchased separately. For a list of supported
transceivers, refer to the product data sheet on the Allied Telesis web site.
Each transceiver port has one LED. Refer to Figure 6.
LED for Top
SPF Port
Figure 6. SFP Transceiver Port LEDs
The LED states are described in Table 5.
Table 5. LEDS for the SFP Transceiver Ports
State
Solid green
Flashing green
Solid amber
Flashing amber
GS980M Series Installation Guide
LED for Bottom
SPF Port
Description
The port has established a 1Gbps link to a
network device.
The port is transmitting or receiving
packets at 1Gbps.
The port has established a 100Mbps link
to a network device.
The port is transmitting or receiving
packets at 100Mbps.
29