Connecting to AC power
To operate the projector at full brightness, make sure the power supply meets the power
requirements for 4K7-HS/4K10-HS projectors. See
information.
Model name
4K7-HS/4K10-HS
For more information detailing the power requirements, refer to the 4K7-HS/4K10-HS Specification
Guide (P/N: 020-001452-XX).
To safely connect the AC power:
1. Connect the AC power cord to the AC inlet on the projector.
2. To keep the AC power cord from falling out, lock it with the safety latch.
3. To unplug the AC power cord, pull up the safety latch.
4K7-HS/4K10-HS Installation and Setup Guide
020-001449-02 Rev. 1 (06-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Power connection
Power requirements
100-240 VAC, 50/60 Hz, 12 A
200-240 VAC, 50/60 Hz, 6 A (rated for China, India, and Korea)
100 VAC, 50/60 Hz, 12 A, 1050 W (rated for Japan)
110-240 VAC, 50/60 Hz, 10 A (rated for Taiwan)
Installation and setup
on page 12 for more
25