Installation and setup
Learn how to install, connect, and optimize the projector display.
Site requirements
To safely install and operate the projector, the instalation location must meet these minimum
requirements.
Physical operating environment
Provides specifications for the operating environment.
•
Ambient temperature (operating): 0°C to 40°C (32°F to 104°F) up to 2500 ft
•
Humidity (non-condensing): 10% to 85% RH
•
Operating altitude: 10,000 ft maximum at 0 to 30°C ambient temperature
Power connection
The projector uses an universal AC power system that allows the projector to operate at full
brightness with a power supply of 100-240 VAC or 200-240 VAC, depending on the regions.
Operating the device outside of this voltage range may cause unsatisfactory operation or damage to
the projector. To ensure safe operation, only use the AC power cord provided with the product or
recommended by Christie. See
power requirements.
Physical specifications
Learn the dimensions and weight of the projector before installation.
•
Projection size, excluding lens, feet (L x W x H): 23.6 x 20.5 x 8.4" (600 x 520 x 214 mm)
•
Shipping size, without lens (L x W x H): 35.6 x 29.9 x 14.8" (905 x 760 x 365 mm)
•
Weight, without lens: 34.0 kg (74.86 lbs)
•
Shipping weight, without lens: 44.5 kg (97.98 lbs)
4K7-HS/4K10-HS Installation and Setup Guide
020-001449-02 Rev. 1 (06-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Connecting to AC power
on page 25 for further information on the
12