How The Projector Works; List Of Components - Christie 4K10-HS Installation And Setup Manual

• Optional HDBaseT 4K card supports HD video streaming through RJ45
• 360 degrees projection enabled by laser light source
• Compatible with HDR content
• Motion Enhancement and Motion Compensation (MEMC) technology for smooth picture quality
when projecting fast motion video
• Wireless desktop display using wireless dongle (optional)
• SNMP traps and email notifications
• All video formats can be resized to full screen either horizontally or vertically while maintaining
aspect ratio
• The projector can be operated using any of the following:
• The built-in keypad, the infrared (IR) remote keypad, a wired remote keypad, or a PC/
device using serial communications (Ethernet or RS232)
• A web page using Ethernet, or from a PC or device using a wireless USB dongle (optional)

How the projector works

The 4K7-HS/4K10-HS projector accepts a variety of input signals for a wide range of commercial
projection applications.
Designed with solid-state illumination light sources and phosphor technology, the red, green and
blue color elements are segmented through a phosphor wheel and then modulated by one Digital
Micromirror Device (DMD) panel responding to incoming data streams of digitized red, green and
blue color information. As these digital streams flow from the source, light from the responding on
pixels of the DMD panel is reflected, converged, and then projected to the screen through
projection lenses, where all pixel reflections are superimposed in sharp full-color images.

List of components

This projector comes with all the items listed below. Check to make sure your package is complete.
If anything is missing, contact your dealer.
• AC power cord
• IR remote keypad and batteries
• Product Safety Guide
4K7-HS/4K10-HS Installation and Setup Guide
020-001449-02 Rev. 1 (06-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
Introduction
10