Connecting To Ac Power - Christie Inspire Series Installation And Setup Manual

Connecting to AC power

To operate the projector at full brightness, make sure the power supply meets the power
requirements for Inspire Series projectors. For more information, refer to
16.
Model name Parameter
DWU760-iS Power rating
Power consumption
DWU860-iS Power rating
DWU960-iS
Power consumption
DWU960ST-iS
For more information detailing the power requirements, refer to the Inspire Series WUXGA
Specification Guide (P/N: 010-108881-01).
To ensure safe operation, only use the AC power cord provided with the product or recommended
by Christie. Connect the AC power cord to the AC inlet on the projector.
Inspire Series Installation and Setup Guide
020-001933-01 Rev. 1 (10-2021)
Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved.
Power requirements
100 to 240 VAC, 50/60 Hz, 5.0A
500 W maximum
100 to 240 VAC, 50/60 Hz, 6.5A
650 W maximum
Installation and setup
Power connection on page
25