Connecting To Video Equipment - Christie 4K10-HS Installation And Setup Manual

Connecting to video equipment

Learn what cable/connectors may be used to connect to various video sources.
Component video output equipment
HDBaseT
ID Connector name
1 HDMI cable
2 DVI In cable
• After connecting the projector to an input device, the projector automatically detects the input
source. You can also select an input source by pressing INPUT.
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• This diagram is for illustrative purposes only and does not indicate that these accessories are
supplied with the projector.
4K7-HS/4K10-HS Installation and Setup Guide
020-001449-02 Rev. 1 (06-2019)
Copyright ©2019 Christie Digital Systems USA Inc. All rights reserved.
DVD player Video cassette recorder
1 2 3
ID Connector name
3 DisplayPort cable
Connecting to devices
33