Connecting to AC power
To operate the projector at full brightness, make sure the power supply meets the power
requirements for HS Series D16-20 projectors. See
information.
Model name
D20WU-HS/D20HD-HS
D16WU-HS/D16HD-HS
For more information detailing the power requirements, refer to the HS Series D16-20 Specification
Guide (P/N: 020-001467-XX).
To ensure safe operation, only use the AC power cord provided with the product or recommended
by Christie. Connect the AC power cord to the AC inlet on the projector.
HS Series D16-20 Installation and Setup Guide
020-001464-02 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.
Power connection
Power requirements
200-240 VAC, 50/60 Hz, 9 A
120-240 VAC, 50/60 Hz, 12 A
200-240 VAC, 50/60 Hz, 7 A (rated for China, India, Taiwan, and Korea)
200 VAC, 50/60 Hz, 7 A, 1250 W (rated for Japan)
Installation and setup
on page 14 for more
26