Overview Of Imaging Parameters - FLIR GRASSHOPPER 3 Series Technical Reference

8.6

Overview of Imaging Parameters

The camera supports control over the following imaging parameters:
Imaging
Parameter
Brightness
Exposure Time
Gain
Auto Exposure
Sharpness
Gamma and Lookup
Table
Image Flip/Mirror
Embedded Image
Information
Bayer Color
Processing (color
models only)
Hue (color models
only)
Saturation (color
models only)
Most of these imaging parameters are defined by modes and values.
There are three modes:
GenICam Control
Mode
Off Feature is in manual mode and values can be set
Continuous Feature is in automatic mode and values cannot be set
Once Feature executes once automatically and then returns to manual mode
Users can define the values for manual operation of a feature.
2/10/2017
©2013-2017
FLIR Integrated Imaging
Solutions Inc. All rights reserved.
GenICam Feature
Analog Control Setting Brightness Using the FlyCapture API
Acquisition Control Setting Shutter Using the FlyCapture API
Analog Control Setting Gain Using the FlyCapture API
Acquisition Control Setting Auto Exposure Using the FlyCapture API
Analog Control Setting Sharpness Using the FlyCapture API
Analog Control Setting Gamma Using the FlyCapture API
Image Format Control
Chunk Data Control
Image Format Control Accessing Raw Bayer Data using FlyCapture
Analog Control Setting Hue Using the FlyCapture API
Analog Control Setting Saturation Using the FlyCapture API
Description
Note: The term Continuous is the same as Auto and the term
Once is the same as One Push.
Grasshopper
8 Grasshopper3 PGE Attributes
FlyCapture API Sample Code
®
3 PGE Technical Reference
69