Mounting With The Case Or Mounting Bracket; Lens Mounting - FLIR GRASSHOPPER 3 Series Technical Reference

4.3

Mounting with the Case or Mounting Bracket

Using the Case
The case is equipped with the following mounting holes:
Two (2) M3 x 0.5 mm mounting holes on the top of the case
n
Four (4) M3 x 0.5mm mounting holes on the bottom of the case that can be used to attach the camera
n
directly to a custom mount or to the tripod mounting bracket
Using the Mounting Bracket
The tripod mounting bracket is equipped with four (4) M3 mounting holes.
Tripod Adapter Dimensions
4.4

Lens Mounting

Lenses are not included with individual cameras.
Related Knowledge Base Articles
Title
Selecting a lens for your camera
The lens mount is compatible with C-mount lenses. Correct focus cannot be achieved using a CS-mount lens on a
C-mount camera.
2/10/2017
©2013-2017
FLIR Integrated Imaging
Solutions Inc. All rights reserved.
Figure 4.2: Tripod Adapter Dimensional Diagram
Article
Knowledge Base Article 10694
®
Grasshopper 3 PGE Technical Reference
4 Grasshopper3 PGE Physical Interface
21