FLIR GRASSHOPPER 3 Series Technical Reference page 29

One_Push ON_OFF
0
1
(Self clear)
Values
If the Presence_Inq bit of the register is one, the value field is valid and can be used for controlling the feature. The
user can write control values to the value field only in the Manual control state. In the other states, the user can
only read the value. The camera always has to show the real setting value at the value field if Presence_Inq is one.
2/10/2017
©2013-2017
FLIR Integrated Imaging
Solutions Inc. All rights reserved.
A_M_Mode
1 0
1 0
®
Grasshopper
3 Tools to Control the Grasshopper3 PGE
Manual control state.
User can control feature by writing value to the value field.
One-Push action.
Camera controls feature by itself only once and returns to the
Manual control state with adjusted value.
3 PGE Technical Reference
State
18