Transport Layer Control - FLIR GRASSHOPPER 3 Series Technical Reference

C.6

Transport Layer Control

All GigE Vision features start with GEV.
PayloadSize
TransmitFailureCount
GevVersionMajor
GevVersionMinor
GevDeviceModeIsBigEndian
GevDeviceModeCharacterSet
GevInterfaceSelector
GevMACAddress
GevCurrentIPConfigurationLLA
GevCurrentIPConfigurationDHCP
GevCurrentIPConfigurationPersistentIP
2/10/2017
©2013-2017
FLIR Integrated Imaging
Solutions Inc. All rights reserved.
Name
Payload Size
Transmit Failure Count
GEV Version Major
GEV Version Minor
GEV Device Mode Is
Big Endian
GEV Device Mode
Character Set
+ GEV Interface
Selector
GEV MAC Address
GEV Current
IPConfiguration LLA
GEV Current
IPConfiguration DHCP
GEV Current
IPConfiguration
Persistent IP
Grasshopper
Display Name
Provides the number of
bytes transferred for each
image or chunk on the
stream channel.
This is mainly used by the
application software to
determine size of image
buffers to allocate.
This contains a count of
the number of failed frame
transmissions that have
occurred since the last
reset. An error occurs if the
camera cannot arbitrate for
the bus to transmit image
data and the image data
FIFO overflows.
Major version of the
specification
Minor version of the
specification
Endianess of device
registers
Character set used by all
the strings of the bootstrap
registers
Selects which physical
network interface to
control
MAC address of the
network interface
Indicates if Link Local
Address (LLA) IP
configuration scheme is
activated on the given
network interface
Indicates if DHCP IP
configuration scheme is
activated on the given
network interface
Indicates if Persistent IP
configuration scheme is
activated on the given
network interface
®
3 PGE Technical Reference
C GenICam Features
Description
True
False
True
False
True
False
True
False
Value
107